Plusieurs types de rivets courants

“A Rivet Is A Peglike Object Used To Connect Two Parts (or Members) With A Through Hole And A Cap At One End. In Riveting, The Use Of Self – Deformation Or Interference To Join The Riveted Parts. There Are Many Kinds Of Rivets, And They Don’t Care About The Form. “

Commonly Used Are R Type Rivet, Fan Rivet, Core Rivet (core Rivet), Tree Rivet, Half Round Head, Flat Head, Half Hollow Rivet, Solid Rivet, Countersunk Head Rivet, Core Rivet, Hollow Rivet, These Are Usually The Use Of Their Own Deformation Connection Riveted Parts. Generally Less Than 8 Mm With Cold Riveting, Larger Than This Size With Hot Riveting. But There Are Exceptions, Such As The Nameplates On Some Locks, Which Are Riveted By The Amount Of Interference Between The Rivets And The Body Holes.

“R Type Plastic Rivets: Also Known As Expansion Rivets, Consisting Of Two Parts Of A Plastic Stud And A Female Buckle. The Installation Base Is Placed In A Smooth Hole Without The Use Of Installation Tools, And Then The Head Is Pressed Down. The Specially Designed Foot Expands And Expands After Being Stressed, And Is Firmly Locked On The Installation Surface. It Is Often Used To Connect Plastic Shell, Light Plate, Insulation Material, Circuit Board, Or Any Other Thin, Light Weight Material, Beautiful And Practical, Easy To Use. “

“Fan Rivets: Specially Designed For Manual Installation, They Can Be Pulled In Through A Hole In The Paneling Or Base Frame. They Are Made Of Elastomaterials With Good Toughness And Can Be Quickly Installed Even In Interference Assembly. The Design Is Clever, With Elastic Function, With The Corresponding Aperture Is Not Easy To Slide Out After Pulling In, Fan Rivets Are Mainly Used In Electronic Computer Cases Between The Fan, Heat Sink And Chip Fixation, With Vibration Prevention, Reduce Noise. “

“Core Rivets Are Very Convenient For Riveting New Riveting Fasteners, In A Relatively Small Space Or No Rivet Gun Or Can Not Use The Rivet Environment, Core Rivets Can Show Their Unique Advantages. Two Or More Connected Parts Can Be Riveted Successfully By Hitting The Nail Core With Hammer And Other Instruments On One Side. Core Rivets Can Be Divided Into Flat Head Core Rivets And Countersunk Head Core Rivets According To The Shape Of The Cap Brim. According To The Different Material Combination, It Can Be Divided Into Aluminum Core Rivets, Aluminum Steel Core Rivets, Stainless Steel Core Rivets, Steel Core Rivets, Aluminum Stainless Steel Core Rivets, Plastic Core Rivets And So On. Core Rivets Do Not Have To Use Manual Riveting Gun Or Pneumatic Riveting Gun To Riveting Like Core Rivets. It Has Better Riveting And Convenience, And Can Be Widely Used In Riveting All Kinds Of Connected Parts. “

“Plastic Tree Rivet Is Also Called Inverted Tooth Shaped Plastic Rivet, Also Known As Christmas Tree Type Plastic Rivet, Tooth Shape Sheet Good Elasticity Can Be Directly Installed In The Round Hole Of Interference Assembly Manually, Tooth Shape Sheet Can Be Fixed According To The Actual Thickness Of The Size Of The Adjustment, The Design Of Inverted Tooth Type Is That The Rivet Is Firmly Fixed On The Installation Surface, Not Easy To Be Pulled Out, Suitable For Foam, Wood, Rubber, Automotive Interior And Other Soft Materials For Fixed Use. Plastic Tree Rivets Have Excellent Insulation, Fire Performance, Non-magnetic, Heat Insulation, Light Weight, High Temperature Resistance, High Strength, Corrosion Resistance, Widely Used In Various Industrial Fields. “

“Rivet Types Can Be Roughly Divided Into Open Mouth Type, Closed Type, Double Drum Type, Single Drum Series. “