Comment installer soi-même le bouton-pression en métal

Tout d'abord, appuyez sur le bouton Comment s'installer

1. According To The Size Of The Button, Cut Two Holes In The Place Where The Button Needs To Be Nailed And Pressed, And Put One Button In It
2. Put The Gasket On It And Press It Firmly With A Hard Object
3. On The Contrary To The Buckle, Concave In The Door Flap, Convex In The Flap. In The Case Of Thin Cloth, Non-woven Lining Should Be Affixed To The Position Where The Seam Is Lifted To Strengthen The Fastness. When Sewing, The Place With Bright Line And Seam Head Drop Should Be Avoided.

Two, Tools: Hammer, Hidden Button, 3.5mm Punching

Méthode d'installation de la boucle :

1. Observez d'abord les composants du bouton caché. Le fermoir quadruple comporte quatre petites pièces, qui peuvent être divisées en deux groupes de bosses et de bosses.
2. Install The Buckle Surface First And Punch Holes On The Leather Surface With A 3.5mm Punch
3. Placez la surface de la boucle sur la base et recouvrez le cuir sur la surface de la boucle.
4. Install Another Matching Part, And Install It With The Protruding Tool In The Installation Tool Set. Pay Attention To The Flat Position And Do Not Press The Fine Spring Line In The Button, Otherwise The Whole Part Will Be Scrapped
5. Align The Mold With The Button, Install It, And Beat It With A Hammer. Pay Attention To The Strength And It Is Best To Be In Place At One Time
6. Punch Holes In The Other Leather Block And Prepare To Install The Button On The Other Side
7. Placez le bouton sur la base, placez le cuir sur le bouton et placez le dernier bouton surélevé dessus.
8. Installez le moule concave, alignez le moule avec le clou et frappez-le vigoureusement avec un marteau. Il est préférable de le mettre en place une fois.

Press The Button How To Remove

Three, Tools: Buckle, Diagonal Pliers

Mesures:

1. Nous devons savoir que les outils sont très importants. Si nous n'avons que des pinces ordinaires et aucune bonne compétence, nous pouvons utiliser les pinces pour serrer les boutons.
2. When We Plan To Break The Button With Pliers, We Must Pay Attention Not To Pull It Too Hard, Otherwise It Is Easy To Pull The Clothes.
3. But If We Use Diagonal Platinum, It Will Be More Convenient, As Long As The Flat Mouth Is Attached To The Fabric Of The Clothing, And Then The Button Can Be Clipped With The Concave Mouth
4. In Fact, Diagonal Pliers Are More Efficient Than Ordinary Pliers. If They Are Used By Girls, They Will Be More Relaxed